Turmed 4055 3 Motor Patient Bed

TM-D-4055 - 4 Motor ABS Coated Patient Bed It performs the height movement with a 6000 N power motor. The backrest can be adjusted between 0 and 70 degrees with a 4000 N motor. The backrest slides 12 cm backwards during lifting, preventing the patient from getting stuck. The knee part can be adjusted between 0 and 35 degrees with a 4000 N power motor. The foot part can take the inverted v, fowler and vascular positions with the manual gear system. The footrest slides 7 cm backwards during take-off, preventing the patient from getting stuck. All functions can be controlled with the remote control. The bed base platform and lower chassis are covered with ABS plastic material. The headboards are made of ABS plastic material and can be easily removed when desired. The railings are in four separate pieces and can be easily opened and closed using the latch at the bottom. Railings are made of ABS plastic material. There is one height adjustable serum hanging apparatus. This hanger can be attached to the four corners of the bed. Four 360 degree rotating wheels, ABS coated, antistatic, two of which have brakes. There are PVC-based, elastic, shock-absorbing buffer wheels on the four corners of the bed. All metal parts are covered with electrostatic powder paint. OPTIONAL HARDWARE: • Battery • X-Ray cassette location • Orthopedic traction frame • Nurse control panel • Railing control • Magnetic locking hand control • Central direction lock • Grab handle • Weighing system • Bed length extension • Drain hanger • Manual CPR on the back EXTERIOR DIMENSIONS: Width: 1070mm - Length: 2030mm - Height: 510-790 mm BED PLATFORM: Width: 900mm – Length: 1900mm